latest news
Book a valuation

Colder months....

The following information is designed to help you prepare for the winter months and keep your home condensation free. We hope you find it to be of use.

Condensation - 

What is condensation? 

Condensation is caused when water vapour comes into contact with cold surfaces and condenses to form dampness or water droplets. Air can contain varying amounts of water vapour; warm air can hold more water vapour than cold air. When warm air comes into contact with a colder surface, it cools down and can’t retain the same amount of water vapour. The excess water vapour is released and forms condensation.

Water vapour is invisible in air and is formed when you breathe and when you carry out normal daily activities in the home. It is also formed as the materials used in the home’s construction dry out.

Condensation in the home 

Condensation is not normally a building fault. It can occur in a new home because building materials, such as mortar and plaster, contain a lot of moisture. Water vapour is formed as the materials dry out when the home is lived in and heated. This is a slow process that takes some time to complete. Modern homes are built so that they don’t waste energy. Better insulation, draught proofing on doors and sealed window units minimise draughts and stop heat escaping from your home. But they also reduce water vapour escaping, which can increase the risk of condensation.

Normal daily activities (such as taking showers and baths, washing and drying clothes, cooking and boiling kettles) produce warm air containing a large amount of water vapour. If the warm air can’t escape through an open window or air vent, it moves around until it finds a cold surface where it cools and forms condensation.

Homes that are heated intermittently are more likely to suffer with condensation problems than homes that are heated continuously. This is because continuous heating keeps the surfaces of the rooms warm which reduces the risk of condensation forming on them. Condensation is most likely to appear on windows, colder parts of walls, around external door and window openings, and where ceilings and floors meet with outer

walls. It can also appear in areas where air circulation is restricted, such as inside cupboards and behind furniture that is placed against an outside wall. If condensation keeps on occurring in the same place, it can sometimes cause black mould growth.

Reducing condensation 

Controlling water vapour levels is important when living in modern, well insulated homes. You are unlikely to prevent condensation in your home completely, but you should aim to reduce it to a level so that it doesn’t cause problems. The following advice should help you to achieve this. 

1.  Produce less moisture

Put lids on saucepans while you are cooking to reduce steam.

Avoid drying laundry on a clothes airer or radiator. If you need to dry clothes indoors, open the window and close the door of the room where the clothes are drying, so that moisture can escape outside rather than circulate around your home.

If you use a vented tumble drier, make sure it is properly vented to an open window or through an outside wall.

2.   Stop moisture spreading through your home

While cooking, bathing or washing, use an extractor fan and/or open a window, and keep the door closed. Keep the extractor fan on and/or the window open for about 20 minutes after you have finished (with the door closed). When condensation appears, wipe it away.

3.  Ventilate moisture away

Leave trickle vents (slotted vents in the window frames) open when rooms are occupied – even in the winter when your heating is on. These vents provide constant ventilation which removes water vapour.

 If you can, put free-standing wardrobes and other furniture against internal walls, leaving a gap between the wall and the furniture so that air can circulate around the room. Try not to overfill cupboards, wardrobes and drawers so that air can circulate around the contents.

4.  Provide even heating

Keep your home warm to avoid cold surfaces, and remember that it can take a long time for a building to warm up.

If your home is unoccupied during the day, make sure the heating timer is set so that your home is warm by the time you return home. During very cold weather it is better to leave the heating on during the day to maintain an even temperature.

The temperature can be set a few degrees lower while you are out and turned up when you return.

If you don’t usually use all of the rooms in your home, you should still keep them heated to avoid cold areas. It is better to keep all rooms heated to a low temperature than to have some rooms heated to a high temperature while others have the heating turned off.

affiliate logos Safe Agent Rightmove Find a Property Zoopla Prime Location The Property Ombudsman Sales The Property Ombudsman Lettings The Deposit Protection Service The National Approved Letting Scheme